Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit covers the skills and knowledge to cut non-uniform and non-printed leathers using machines, knives and interlocking knives. |
Application of the Unit
Application of the Unit |
The unit applies to the cutting of irregular and non-uniform leather materials to specifications and workplace standards using machines, knives and interlocking knives. It involves the application of discretion, initiative and judgement while working to defined procedures and methods. Work may be conducted in small to large scale enterprises and may involve individual and team activities. The application of this unit is according to OHS practices of the enterprise and workplace practices, which may include:
This unit requires the application of skills associated with planning and organising to cut non-printed materials. Problem solving skills are required to ensure materials conform to requirements and identify any processing problems. Communication skills are used to refer to and complete required documentation. Self management skills are used to ensure safe use of technology and conformance of own work to quality standards. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisites |
Employability Skills Information
Employability Skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Not applicable.
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1 Assess different qualities and types of materials |
1.1 Materials are assessed against job specifications. 1.2 Various types and finish of materials are checked according to work ticket. 1.3 Materials are inspected and sorted according to colours, shades and finish. 1.4 Materials that cannot be matched are handled and stored. |
2 Start up, shut down, adjust and carry out minor maintenance with safety |
2.1 Machines are started up and shut down according to safety regulations. 2.2 Cutting board is regularly cleaned, turned and maintained. 2.3 Striker plate is regularly checked for distortion and damage and irregularities reported. |
3 Cut linings and components from materials by press or hand |
3.1 Knives are selected according to job specifications and size requirements and used according to OHS practices. 3.2 Pressures on press are adjusted to knife sizes and shapes. 3.3 Work ticket specifications are followed according to pairs and pieces. 3.4 Parts are cut to workplace quality standards in relation to materials flaws and acceptable levels of matching of irregular and non-uniform finishes. 3.5 Decisions are made about individual pairs based on colour and grain approximation according to workplace quality standards. 3.6 Pairs are cut to appropriate allowances, to achieve best yield and best matching of materials. 3.7 Distortions and defects on press cutting knives, dies and cutting boards are identified and appropriate action taken. 3.8 Work is carried out according to OHS practices. |
4 Check finished product |
4.1 Finished product is checked against workplace quality standards. 4.2 Failure to meet quality standards is addressed. |
Required Skills and Knowledge
This describes the essential skills and knowledge and their level, required for this unit. |
Demonstrates knowledge of:
|
Demonstrates skills to:
|
Evidence Guide
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package. |
|
Critical aspects of evidence |
Demonstrates skills and knowledge to:
|
Consistency in performance |
Consistently applies skills and knowledge when:
|
Resource implications |
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices. |
Context for assessment |
Assessment may occur on the job or in an appropriately simulated environment. |
Interdependent assessment |
This unit may be assessed independently or in combination with other relevant units. |
Range Statement
RANGE STATEMENT The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts. |
|
Legislative/regulatory requirements |
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements. |
Materials may include: |
|
Inspected refers to |
|
Machines may include: |
|
Knives may include: |
|
OHS practices |
OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:
|
Unit Sector(s)
Sector |
Footwear Production |