Modification History
Release 2 - imported units updated to current versions, outcomes equivalent.
Description
Job roles /employment outcomes
The Certificate IV in Custom-made Footwear covers occupations such as custom-made footwear technical and production roles.
Application
The Certificate IV in covers occupations in a production environment where footwear is typically custom-made or involves small production quantities.
Pathways Information
Pathways into the qualification
Direct entry into this qualification requires completion of a total of twenty-five (25) units according to the rules described below.
Credit may be granted towards this qualification by those who have completed LMT30707 Certificate III in Footwear Production or achieved equivalent industry experience.
Pathways from the qualification
Further training pathways from this qualification include relevant manufacturing, design or management qualifications.
Licensing/Regulatory Information
There are no specific licences that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements in some environments. Local regulations should be checked for details.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
Employability Skills Summary - Certificate IV in Custom-made Footwear The following table contains a summary of the Employability Skills as identified by the custom-made footwear industry for this qualification. This table should be interpreted in conjunction with the detailed requirements of each unit of competency packaged in this qualification. The outcomes described here are broad industry requirements that reflect skill requirements for this level. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem-solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
To be awarded the Certificate IV in Custom-made Footwear, competency must be achieved in twenty-five (25) units of competency.
- Ten (10) core units of competency
- Fifteen (15) elective units of competency as specified below.
If Certificate III in Footwear Production has been achieved, an additional seven (7) units are required. All core units listed must be achieved - any Certificate IV core units not achieved at Certificate III must be completed as part of the additional seven (7) units required for Certificate IV. Units that have been credited towards lower level qualifications must not be selected in the additional unit requirement.
Note: Where prerequisite units apply, these have been noted, and must be considered in the total number of units.
CORE UNITS
Complete all ten (10) units from this list
Unit code |
Unit title |
|
LMTFP2001B |
Identify materials used in footwear production |
|
LMTFP4001A |
Develop design for custom-made footwear |
|
LMTFP4002A |
Make patterns for custom-made footwear |
|
LMTFP4003A |
Prepare, cut and sew custom-made shoe components |
|
LMTFP4004A |
Assemble and finish custom-made shoe |
|
LMTFP4005A |
Fit custom-made footwear |
|
LMTGN2001B |
Follow defined OH&S policies and procedures |
|
LMTGN2002B |
Apply quality standards |
|
LMTGN2003B |
Work in the Textiles, Clothing and Footwear industry |
|
MSAENV272B |
Participate in environmentally sustainable work practices |
ELECTIVE UNITS
Select fifteen (15) units as specified below.
- A minimum of one (1) unit must be selected from Group A
- A minimum of two (2) units must be selected from Group B
- A minimum of one (1) unit must be selected from Group C
- A maximum of two (2) units may be selected from Group E
- A maximum of four (4) units may be selected from Group F
- The remainder must be selected from Groups A, B, C and D.
NOTE: Competitive Manufacturing Training Package units, identified in Group E as MSACM coded units, should be selected on the basis of work requirements. Those at Certificate II level (units in the 200 series) are appropriate for operators. MSACM units for those in Certificate III level positions such as team leaders should be selected from both the 200 series and the 400 series.
GROUP A
Unit code |
Unit title |
Prerequisites |
LMTFD4003B |
Assist in preparation of preliminary design concepts |
|
LMTFD4014B |
Identify contemporary fashion influences and construction techniques |
|
LMTGN4001A |
Coordinate or set up machine/s for product change |
|
LMTGN4002A |
Participate in product engineering |
|
LMTGN4005A |
Plan and implement production within a work area |
|
LMTGN4010A |
Implement and monitor OH&S in the workplace |
|
LMTGN4011A |
Coordinate quality system and procedures |
|
LMTGN4012A |
Fabricate or machine tooling |
|
LMTGN4016A |
Contribute to the development of products or processes |
GROUP B
Unit code |
Unit title |
Prerequisites |
LMTFP3001B |
Cut leather by hand |
|
LMTFP3002B |
Hand last shoe |
|
LMTFP3003B |
Assemble shoe by hand |
LMTFP2001B |
LMTFP3004B |
Contribute to footwear production improvement processes |
LMTGN2002B |
LMTFP3005B |
Supervise footwear production operations |
|
LMTFP3006B |
Apply foot anatomy principles to footwear production |
GROUP C
Unit code |
Unit title |
Prerequisites |
LMTFP3001B |
Cut leather by hand |
|
LMTFP3002B |
Hand last shoe |
|
LMTFP3003B |
Assemble shoe by hand |
LMTFP2001B |
LMTFP3004B |
Contribute to footwear production improvement processes |
LMTGN2002B |
LMTFP3005B |
Supervise footwear production operations |
|
LMTFP3006B |
Apply foot anatomy principles to footwear production |
|
LMTGN3001B |
Control production in a section of a Textiles, Clothing and Footwear enterprise |
|
LMTGN3002B |
Organise and plan own work to achieve planned outcomes |
|
LMTGN3003B |
Estimate and cost job |
|
LMTLG3005A |
Grade leather |
GROUP D
Unit code |
Unit title |
Prerequisites |
LMTFD3004B |
Draw a trade drawing for fashion design |
|
LMTFP2002B |
Perform stuff cutting |
|
LMTFP2003B |
Cut printed materials by machine |
|
LMTFP2004B |
Cut non printed leather by machine |
|
LMTFP2005B |
Operate machine to sew upper |
|
LMTFP2006B |
Machine upper according to product requirements |
LMTFP2005B |
LMTFP2007B |
Last shoe by machine |
|
LMTFP2008B |
Perform moulding operations |
|
LMTFP2009B |
Perform footwear finishing operations |
|
LMTFP2010B |
Repair footwear product |
|
LMTFP2011B |
Perform table-based operations |
|
LMTGN2004B |
Work in a team environment |
|
LMTGN2005B |
Perform minor maintenance |
|
LMTGN2006B |
Perform test or inspection to check product quality |
|
LMTGN2007B |
Select, transfer and remove materials and products |
|
LMTGN2008B |
Coordinate work of team or section |
|
LMTGN2009B |
Operate computing technology in a Textiles, Clothing and Footwear workplace |
|
LMTGN2010B |
Perform tasks to support production |
|
LMTGN3008A |
Draw 3D designs |
|
LMTLG2000A |
Skive leather pieces |
GROUP E
Unit code |
Unit title |
Prerequisites |
MSS402010A |
Manage the impact of change on own work |
|
MSS403010A |
Facilitate change in an organisation implementing competitive systems and practices |
|
MSS402001A |
Apply competitive systems and practices |
|
MSS402002A |
Sustain process improvements |
|
MSS403001A |
Implement competitive systems and practices |
|
MSS403002A |
Ensure process improvements are sustained |
|
MSS402020A |
Apply quick changeover procedures |
|
MSS402021A |
Apply Just in Time procedures |
|
MSS402030A |
Apply cost factors to work practices |
|
MSS402031A |
Interpret product costs in terms of customer requirements |
|
MSS402040A |
Apply 5S procedures |
|
MSS402050A |
Monitor process capability |
|
MSS402060A |
Use planning software systems in operations |
|
MSS402061A |
Use SCADA systems in operations |
|
MSACMT270A |
Use sustainable energy practices |
|
MSS402080A |
Undertake root cause analysis |
|
MSS402081A |
Contribute to the application of a proactive maintenance strategy |
|
MSS403021A |
Facilitate a Just in Time system |
|
MSS403030A |
Improve cost factors in work practices |
|
MSS403032A |
Analyse manual handling processes |
|
MSS403040A |
Facilitate and improve implementation of 5S |
|
MSS404050A |
Undertake process capability improvements |
MSS404052A |
MSS403051A |
Mistake proof an operational process |
|
MSS404052A |
Apply statistics to operational processes |
|
MSS404060A |
Facilitate the use of planning software systems in a work area or team |
MSS402060A |
MSS404061A |
Facilitate the use of SCADA systems in a team or work area |
|
MSS404081A |
Undertake proactive maintenance analyses |
|
MSS404082A |
Assist in implementing a proactive maintenance strategy |
|
MSAENV472B |
Implement and monitor environmentally sustainable work practices |
GROUP F
Other Footwear units that are available at Certificates IV (maximum 4) or V (maximum 1) |
Other TCF Training Package units that are available at Certificates III (maximum 1), IV (maximum 4) and V (maximum 1) |
Units from other endorsed Training Packages and accredited courses at Certificates III (maximum 1), IV (maximum 4) and V (maximum 1) |