Modification History
LMFGG2002B Replaced by HLTFA301B Apply First Aid
Description
This qualification describes the skills and knowledge required to perform coopering using a variety of specialist machines to work timber and utilising basic welding techniques in the barrel making process.
Job roles /employment outcomes
The LMF31308 Certificate III in Coopering reflects vocational outcomes for those performing coopering job roles in a defined range of skilled operations, usually within a range of broader related activities involving known routines, methods and procedures, where some discretion and judgement is required in the selection of equipment, services or contingency measures and within known time constraints.
Application
This qualification is typically used to develop skills and a breadth, depth and complexity of knowledge in coppering techniques and would cover selecting, adapting and transferring this skill and knowledge to new environments and providing technical advice and some leadership in resolution of specific problems. Application would be across a range of roles in a variety of contexts with some complexity in the extent and choice of options available and may involve some responsibility for others. Participation in teams including group or team coordination may be required.
Pathways into the qualification
This qualification may be accessed by direct entry. Credit can be granted towards this qualification by those who have completed LMF21308 Certificate II in Coopering or achieved equivalent industry experience.
Pathways from the qualification
Further training pathways from this qualification may include other furnishing qualifications at Certificate IV and Diploma level and relevant supervisory, management or competitive manufacturing qualifications.
Licensing considerations
There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem-solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules
To be awarded the LMF31308 Certificate III in Coopering, competency must be achieved in twenty-five (25 ) units of competency.
- fifteen (15 ) core units of competency
- ten (10 ) elective units of competency.
Note: Where prerequisite units apply, these have been listed, and must be considered in the total number of units.
CORE UNITS
Complete all fifteen (15 ) units from this list.
Unit code |
Unit title |
Prerequisites |
LMFCP2001A |
Use coopering sector hand and power tools |
|
LMFCP2002A |
Produce barrels using non-fired processes |
|
LMFCP3001A |
Apply product knowledge to production operations |
|
LMFCP3002A |
Select and season timbers for furniture production |
|
LMFCP3003A |
Produce barrels using fired processes |
|
LMFFM2006B |
Hand make timber joints |
|
HLTFA301B |
Apply First Aid |
|
LMFGN2002B |
Move and store materials and products |
|
LMFGN3001B |
Read and interpret work documents |
|
MSAENV272B |
Participate in environmentally sustainable work practices |
|
MSAPMOHS200A |
Work safely |
|
MSAPMOPS101A |
Make measurements |
|
MSAPMSUP102A |
Communicate in the workplace |
|
MSAPMSUP106A |
Work in a team |
|
TLID307E |
Handle dangerous goods/hazardous substances |
ELECTIVE UNITS
Select ten (10 ) units from Groups A, B and C as specified below.
Group A
Select a minimum of four (4 ) units from Group A
Unit code |
Unit title |
Unit code |
LMFFM2010B |
Set up, operate and maintain basic static machines |
|
LMFFM2012B |
Set up, operate and maintain pressure and clamping machines |
|
LMFFM3020B |
Set up, operate and maintain sawing machines |
|
LMFFM3022B |
Set up, operate and maintain joining machines |
|
LMFFM3033B |
Construct jigs and fixtures |
Group B
Select up to six (6 ) units form Groups B and C
Unit code |
Unit title |
Prerequisites |
LMFCP3004A |
Maintain and repair barrels |
|
LMFFF2004B |
Prepare surfaces for finishing |
|
LMFFM2002B |
Assemble furnishing components |
|
LMFFM2003B |
Select and apply hardware |
|
LMFFM2005B |
Join solid timber |
|
LMFFM2007B |
Follow plans to assemble production furniture |
|
LMFFM3023B |
Set up, operate and maintain planing and finishing machines |
|
LMFFM3024B |
Set up, operate and maintain multi-head planning and moulding machines |
|
LMFFM3025B |
Set up, operate and maintain routing and shaping machines |
|
LMFFM3032B |
Produce and maintain cutting tools |
|
LMFGN3002B |
Estimate and cost job |
|
MEM05007C |
Perform manual heating and thermal cutting |
|
MEM05012C |
Perform routine manual metal arc welding |
|
MEM05050B |
Perform routine gas metal arc welding |
|
MEM06001B |
Perform hand forging |
|
MEM18001C |
Use hand tools |
Group C
Up to five (5 ) relevant units may be chosen from units not already selected from Groups A or B, or units available in this Training Package or other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate II level (maximum 1 unit), Certificate III level (maximum 5 units) or Certificate IV level (maximum 1 unit).
Units selected from other Training Packages and accredited courses via Group C must be relevant to the qualification outcome and not duplicate units available within this qualification.
If Competitive Manufacturing units are chosen (identified as MSACM in the code), these should only be selected on the basis of work requirements.