Modification History
Not applicable.
Description
This qualification describes the skills and knowledge required to perform a range of glass and glazing job roles including safely processing, moving and installing various types of glass and handling glass materials and components.
Job roles /employment outcomes
The LMF30602 Certificate III in Glass and Glazing reflects vocational outcomes for those performing glass and glazing functions in residential and commercial operations and could include manufacturing, processing and installation. Job roles would be in a defined range of skilled operations, usually within a range of broader related activities involving known routines, methods and procedures, where some discretion and judgement is required in the selection of equipment, services or contingency measures and within known time constraints.
Application
This qualification is typically used to develop skills and a breadth, depth and complexity of knowledge in a full range of glass and glazing techniques and would cover selecting, adapting and transferring this skill and knowledge to new environments and providing technical advice and some leadership in resolution of specific problems. Application would be across a range of roles in a variety of contexts with some complexity in the extent and choice of options available and may involve some responsibility for others. Participation in teams including group or team coordination may be required.
Pathways into the qualification
This qualification may be accessed by direct entry. Credit can be granted towards this qualification by those who have completed LMF20402 Certificate II in Glass and Glazing with units included in this qualification or achieved equivalent industry experience.
Pathways from the qualification
Further training pathways from this qualification may include Furnishing Certificate IV or Diploma and relevant supervisory, management or competitive manufacturing qualifications.
Licensing considerations
Depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Licensing of glazing work applies in Queensland, NSW and South Australia. Local regulations should be checked for details.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem-solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules
To be awarded the LMF30602 Certificate III in Glass and Glazing, competency must be achieved in twenty-four (24 ) units of competency.
- fourteen (14 ) core units of competency
- ten (10 ) elective units of competency.
Note: Where prerequisite units apply, these have been listed, and must be considered in the total number of units.
CORE UNITS
Select all fourteen (14 ) units from this list:
Unit code |
Unit title |
Prerequisites |
LMFGG2001B |
Use glass and glazing sector hand and power tools |
|
LMFGG2002B |
Apply First Aid |
|
LMFGG2003B |
Operate glass freefall rack and Table |
|
LMFGG2004B |
Process thin glass by hand |
|
LMFGG2005B |
Move glass sheets by hand |
|
LMFGG2007B |
Process glass by basic machines |
|
LMFGG2008B |
Glaze/reglaze residential windows and doors |
|
LMFGG3002B |
Assess glass and glazing requirements |
|
LMFGG3004B |
Process thick glass by hand |
|
MSAENV272B |
Participate in environmentally sustainable work practices |
|
MSAPMOHS200A |
Work safely |
|
MSAPMOPS101A |
Make measurements |
|
MSAPMSUP102A |
Communicate in the workplace |
|
MSAPMSUP106A |
Work in a team |
ELECTIVE UNITS
Select a maximum of ten (10 ) elective units from Groups A and B as specified below.
Group A
A minimum of six (6 ) units must be chosen from Group A
Unit code |
Unit title |
Prerequisites |
LMFGG2006B |
Move single glass sheets by mechanical means |
|
LMFGG2009B |
Fabricate and assemble metal frames |
|
LMFGG2010B |
Fabricate and install insect and security screens |
|
LMFGG3001B |
Store and handle glass |
|
LMFGG3003B |
Move block/bulk glass sheet by mechanical means |
|
LMFGG3005B |
Process glass by semi-automatic and automatic machines |
|
LMFGG3006B |
Apply film to glass |
|
LMFGG3007B |
Form glass |
|
LMFGG3008B |
Apply patterns and designs to glass |
|
LMFGG3009B |
Set up and operate glass laminating equipment |
|
LMFGG3010B |
Set up and operate glass toughening equipment |
|
LMFGG3011B |
Set up and operate glass silvering equipment |
|
LMFGG3012B |
Set up and operate insulated glass unit manufacturing equipment |
|
LMFGG3013B |
Construct and repair leadlight panels |
|
LMFGG3014B |
Prepare and install mirrors |
|
LMFGG3015B |
Fabricate and install shower screens and wardrobe doors |
|
LMFGG3016B |
Fabricate and install residential windows and doors |
|
LMFGG3017B |
Fabricate and install commercial glazing |
|
LMFGG3018B |
Prepare and install architectural engineered glazing |
|
LMFGG3019B |
Conduct commercial and structural glazing |
Group B
Up to a maximum of four (4 ) electives may be chosen from those not already selected from Group A, other units available in this Training Package or other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate II level (maximum 1 unit), Certificate III level (maximum 4 units) or Certificate IV level (maximum 1 unit).
Units selected from other Training Packages and accredited courses via Group B must be relevant to the qualification outcome and not duplicate units available within this qualification.
If Competitive Manufacturing units are chosen (identified as MSACM in the code), these should only be selected on the basis of work requirements.