Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit describes the performance outcomes, skills and knowledge required to set up and produce hand-fastened product. |
Application of the Unit
Application of the unit |
This unit requires the individual to set up and produce hand-fastened product. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisite units |
||
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Prepare for job |
1.1. Job specifications are read and interpreted from job documentation or production control system 1.2. Set-up is carried out correctly in minimum time with minimum wastage 1.3. Availability of all job related components is checked 1.4. Fastening system is set up and adjusted according to job specifications |
2. Conduct sample run |
2.1. Raw material to be used for sample is organised correctly 2.2. Equipment is set up and operated to produce a specified sample according to OHS requirements, manufacturer's specifications and enterprise procedures 2.3. Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures 2.4. Results are interpreted to determine adjustment requirements 2.5. Adjustment changes are carried out according to product and equipment specifications |
3. Maintain basic fastening (adhesive/ mechanical) process (OR Element 4) |
3.1. Registration of fastening is monitored and adjusted to ensure quality of product meets the standard of the approved sample 3.2. Wire straightness, length, cut-off and clinching pressures are monitored and adjusted to ensure quality of product meets the standard of the approved sample OR 3.3. Adhesion is monitored and adjusted to ensure quality of product meets the standard of the approved sample |
4. Maintain hand sewing process (OR Element 3) |
4.1. Appropriate sewing supports are selected and spaced according to job specifications 4.2. Consistent thread tension is maintained during sewing 4.3. Sections are aligned at the head 4.4. Swelling is monitored and controlled |
5. Maintain production process |
5.1. Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule 5.2. Production is maintained according to OHS requirements, manufacturer's specifications and enterprise procedures 5.3. Performance is monitored and verified using the process control system according to enterprise procedures 5.4. Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention 5.5. Process adjustments to eliminate problems are reported according to enterprise procedures 5.6. Faulty performance of equipment is identified and reported according to enterprise procedures 5.7. Waste is sorted according to enterprise procedures |
6. Identify and rectify problems and faults |
6.1. Problems in fastening (adhesive/mechanical) equipment are identified and reported according to enterprise procedures 6.2. Adjustments or corrections are carried out according to specified procedures and are consistent with operator's skill level 6.3. Fastening (adhesive/mechanical) equipment operation is checked to ensure correct operation |
7. Clean fastening equipment |
7.1. Mechanical fastening unit is disengaged and cleaned ready for next run OR 7.2. Glue system is washed up ready for next run, and liquid waste is disposed of according to regulatory requirements and enterprise procedures 7.3. Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures 7.4. Machine faults requiring repair are identified and reported to designated person according to enterprise procedures 7.5. Repair/adjustment is verified prior to resumption of operations 7.6. Production records or other documentation are accurately completed where required by enterprise procedures |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
|
Required knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
Evidence of the following is essential:
|
Context of and specific resources for assessment |
Assessment must ensure:
|
Method of assessment |
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
|
Guidance information for assessment |
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:
Depending on the configuration of equipment and types of jobs, virtually any other converting, binding and finishing set up unit can be assessed at the same time. |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Fastening process may include: |
|
Fastening units may include: |
|
Substrate types may include: |
|
Substrate handling may include: |
|
Unit Sector(s)
Unit sector |
Competency field
Competency field |
Converting, Binding and Finishing |
Co-requisite units
Co-requisite units |
||