Unit of competency
Modification History
Release |
Comments |
Release 1 |
This version first released with ICP Printing and Graphic Arts Training Package Version 1.0. |
Application
This unit describes the skills and knowledge required to prepare cutting formes (two large and two small) to accommodate different complexities of cutting containing multiple images with extremely tight registration and highly accurate cutting requirements.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Unit Sector
Converting, Binding and Finishing
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Obtain job instuctions and locate forme |
1.1 Job sheets or instructions are interpreted correctly 1.2 Existing formes are located in storage area using filing system and new formes and associated tooling are collected from holding location |
2. Check cutting forme |
2.1 Cutting forme/tooling is checked against master sample for accuracy of cut and fold 2.2 Centre line is located and checked to ensure accuracy of positioning/registration on Bobst |
3. Position and set up counters |
3.1 Cutting plate is located and prepared for counters 3.2 Counters are accurately positioned and set up on cutting plate to ensure registration with cutting forme |
4. Conduct sample cut |
4.1 Material to be used for sample cut is obtained 4.2 Cutting forme and cutting plate are accurately positioned on machine 4.3 Machine is operated to produce sample according to enterprise procedures |
5. Check sample |
5.1 Sample is accurately cut and registration of tooling is precise 5.2 Forme or tooling is adjusted if necessary, according to job specifications 5.3 Sample is confirmed as correct by supervisor if required |
6. Set up stripping forme and blank separator |
6.1 Pins are positioned on stripping forme to ensure accurate removal of waste board 6.2 Blank separator is set up according to job specifications |
7. Undertake filing procedure |
7.1 Correct identification number is allocated to cutting formes/tooling and strippers, and recorded 7.2 Information is correctly entered into filing system according to enterprise procedures |
Foundation Skills
This section describes language, literacy, numeracy and employment skills incorporated in the performance criteria that are required for competent performance.
Skill |
Performance Criteria |
Description |
Reading |
1.1, 1.2, 5.2, 6.2, 7.2 |
|
Writing |
7.1, 7.2 |
|
Navigate the world of work |
4.3, 7.2 |
|
Get the work done |
1.1, 1.2, 2.1, 2.2, 3.2, 4.1-4.3, 5.1, 5.2, 6.1, 6.2, 7.2 |
|
Unit Mapping Information
Code and title current version |
Code and title previous version |
Comments |
Equivalence status |
ICPCBF326 Undertake pre make-ready for die cutting |
ICPCF326C Undertake pre make-ready for die cutting |
Updated to meet Standards for Training Packages |
Equivalent unit |
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=a74b7a0f-a253-47e3-8be0-5d426e24131d