Modification History
Release |
Comments |
Release 1 |
This Qualification first released with ICP10 Printing and Graphic Arts Training Package version 2.0. Core unit ‘BSBSUS301A Implement and monitor environmentally sustainable work practices’ replaced with ‘BSBSUS201A Participate in environmentally sustainable work practices’, and native and imported units updated. Replaces ICP30810 Certificate III in Printing and Graphic Arts (Sacks and Bags). |
Description
This qualification applies to skilled operators who work in the sacks and bags area in the printing industry. They prepare material, monitor and run a range of sack and bag equipment and apply solutions to a defined range of unpredictable problems. They may also provide leadership and guidance to others with some limited responsibility for the output of others.
Job Roles
- Sack/bag machinist
Pathways Information
Pathways into the qualification
Candidates may enter the qualification with limited or no vocational experience and without a relevant lower level qualification. However, the preferred pathway for candidates entering this qualification is one of the following qualifications:
- ICP20110 Certificate II in Printing and Graphic Arts (General)
- ICP20710 Certificate II in Printing and Graphic Arts (Sacks and Bags).
Pathways from the qualification
At the completion of this qualification candidates could choose to enter a:
- ICP40710 Certificate IV in Printing and Graphic Arts (Process Leadership).
Licensing/Regulatory Information
There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.
Units in qualification with prerequisites
Code and title |
Prerequisite units required |
ICPCF3100C Run and monitor in-line tube making machine for sack or bag manufacture |
ICPCF298C Run and monitor sack and bag machines |
ICPCF398C Set up in-line bottom making machine for sack or bag manufacture |
ICPCF298C Run and monitor sack and bag machines |
Entry Requirements
There are no entry requirements for this qualification.
Employability Skills Summary
The following table contains a summary of the Employability Skills required for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options.
Employability Skill |
Industry/enterprise requirements for this qualification include: |
Communication |
|
Teamwork |
|
Problem solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Total number of units = 19 units
4 core units plus
5 elective units from Group A plus
10 elective units from Group B.
Up to 2 elective units from Group A can be substituted with Group B elective units listed below.
6 elective units must be selected from the Group B elective units listed below.
Up to 4 Group B elective units may be selected from the remaining elective units or from qualifications at the same qualification level or one level higher, in this Training Package or any other endorsed Training Package or accredited course.
Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs.
Core Units
BSBSUS201A Participate in environmentally sustainable work practices
ICPSU216C Inspect quality against required standards
ICPSU260C Maintain a safe work environment
ICPSU262C Communicate in the workplace
Group A Elective Units
BSBWOR301B Organise personal work priorities and development
ICPKN319C Apply knowledge and processes of converting paper-based products
ICPCF298C Run and monitor sack and bag machines
ICPSU201C Prepare, load and unload reels and cores on and off machine* OR
ICPSU202C Prepare, load and unload product on and off machine*
ICPSU203C Prepare and maintain the work area
ICPSU225C Perform small machine maintenance
ICPSU224C Perform basic machine maintenance
ICPSU323C Dispose of waste
* Both of these units can be selected in this qualification, if the enterprise requires both.
Group B Elective Units
BSBINN201A Contribute to workplace innovation
BSBFLM309C Support continuous improvement systems and processes
ICPCF221C Set up and produce basic guillotined product
ICPCF241C Set up machine for basic single or continuous folding
ICPCF261C Set up machine for basic adhesive, mechanical or thermal fastening
ICPCF281C Set up machine for basic laminating
ICPCF298C Run and monitor sack and bag machines
ICPCF398C Set up in-line bottom making machine for sack or bag manufacture
ICPCF3100C Run and monitor in-line tube making machine for sack or bag manufacture
ICPPR313C Set up for basic flexographic printing
ICPSU211C Prepare ink and additives
ICPSU221C Pack and dispatch product
ICPSU241C Undertake warehouse or stores materials processing
ICPSU263C Perform basic industry calculations
ICPSU342C Undertake inventory procedures
ICPSU351C Undertake basic production scheduling
ICPSU352C Plan operational processes
ICPSU362C Communicate as part of a work team
ICPSU456C Control production
MSACMC210A Manage the impact of change on own work
MSACMS200A Apply competitive manufacturing practices
MSACMS201A Sustain process improvements
MSACMT230A Apply cost factors to work practices
MSACMT240A Apply 5S procedures in a manufacturing environment
MSACMT280A Undertake root cause analysis
MSAPMSUP390A Use structured problem solving tools