Modification History
Not applicable.
Description
Descriptor
This qualification applies to individuals who perform a range of mainly routine tasks in paper converting sector, specific to corrugating in the printing and graphic arts industry. They prepare materials and operate and monitor corrugating equipment and machinery and generally work under direct supervision, and use limited practical skills and fundamental operational knowledge in a defined context.
Job Roles
Machine operator
Pathways Information
Qualification Pathways
Entry requirements
There are no entry requirements for this qualification.
Pathways into the qualification
Candidates may enter the qualification with limited or no vocational experience and without a relevant lower level qualification.
Pathways from the qualification
At the completion of this qualification candidates could choose to enter a:
- ICP30910 Certificate III in Printing and Graphic Arts (Cartons and Corrugating).
Licensing/Regulatory Information
Licensing , legislative , regulatory or certification considerations
There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.
Entry Requirements
Not applicable.
Employability Skills Summary
|
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
|
ICP20910 Certificate II in Printing and Graphic Arts (Corrugating ) |
|
|
The following table contains a summary of the Employability Skills required for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options. |
|
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
|
Communication |
|
|
Teamwork |
|
|
Problem solving |
|
|
Initiative and enterprise |
|
|
Planning and organising |
|
|
Self-management |
|
|
Learning |
|
|
Technology |
|
Packaging Rules
|
Packaging Rules |
|
Total number of units = 15 units 4 core units , plus 5 elective units from Group A , plus 6 elective units from Group B . Up to 2 elective units from Group A can be substituted with Group B elective units listed below. 4 elective units must be selected from the Group B elective units listed below. Up to 2 Group B elective units may be selected from the remaining elective units or from qualifications at the same level or one level higher, in this Training Package or any other endorsed Training Package or accredited course. Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs. |
|
Core Units |
|
BSBSUS201A Participate in environmentally sustainable work practices ICPSU216C Inspect quality against required standards ICPSU260C Maintain a safe work environment ICPSU262C Communicate in the workplace |
|
Group A Elective Units |
|
ICPSU201C Prepare, load and unload reels and cores on and off machine* OR ICPSU202C Prepare, load and unload product on and off machine* ICPSU203C Prepare and maintain the work area ICPSU207C Prepare machine for operation (basic) ICPSU208C Operate and monitor machines (basic) ICPSU224C Perform basic machine maintenance ICPSU280C Enter data into electronic system * Both of these units can be selected in this qualification, if the enterprise requires both. |
|
Group B Elective Units |
|
ICPCF2104C Set up single-faced web ICPCF2106C Set up double-faced web ICPCF3105C Produce single-faced web ICPCF3107C Produce double-faced web ICPSU222C Pack and dispatch solid waste ICPSU235C Lift loads mechanically ICPSU236C Shift loads mechanically ICPSU241C Undertake warehouse or stores materials processing ICPSU261C Follow OHS practices and identify environmental hazards ICPSU271C Provide basic instruction for a task MSACMC210A Manage the impact of change on own work MSACMS200A Apply competitive manufacturing practices MSACMS201A Sustain process improvements MSACMT230A Apply cost factors to work practices MSACMT240A Apply 5S procedures in a manufacturing environment MSACMT280A Undertake root cause analysis |
