Modification History
Not Applicable
Unit Descriptor
Unit descriptor |
This unit describes the outcomes required to match, stitch, tape or glue slices of veneer in readiness for bonding to panel products General workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publication This unit replaces FPIWPP3205A Match and join veneer |
Application of the Unit
Application of the unit |
The unit involves matching and joining veneer in a forest products factory. The skills and knowledge required for competent workplace performance are to be used within the scope of the person's job and authority |
Licensing/Regulatory Information
Refer to Unit Descriptor
Pre-Requisites
Prerequisite units |
||
Employability Skills Information
Employability skills |
This unit contains employability skills |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Prepare for joining veneer |
1.1. Applicable Occupational Health and Safety (OHS), environmental , legislative and organisational requirements relevant to matching and joining veneer are identified and complied with 1.2. Work order is reviewed and checked with appropriate personnel 1.3. Type and quantity of veneer to be matched and joined is acquired from the veneer production process 1.4. Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations 1.5. Matching and joining process is selected in accordance with site procedures 1.6. Communication with others is established and maintained in line with OHS requirements |
2. Match and join veneer |
2.1. Pre start -up checks are carried out on equipment in line with site requirements 2.2. Machine functions and feed rate are set for optimal recovery of product 2.3. Joining method is selected in line with the veneer being matched 2.4. Sheets are visually assessed and matched to specification 2.5. Sheets are clipped to provide clean edges and joined in line with organisational requirements 2.6. Matching and joining processes are recorded and reported to the appropriate personnel |
3. Redistribute material |
3.1. Veneer is regraded and joins assessed in line with site requirements and industry standards 3.2. Material is directed and moved to storage or processing operations in line with site requirements 3.3. Sub-standard material is rejected and disposed of in accordance with site procedures and environmental requirements 3.4. Excess glue is disposed of and unused glue is stored or disposed of, in line with environmental regulations 3.5. Work area is cleaned in line with site requirements |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This describes the essential skills and knowledge and their level required for this unit. |
Required skills |
|
Required knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently match and join veneer in line with organisational requirements |
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements of this unit and include demonstration of:
|
Context of and specific resources for assessment |
|
Method of assessment |
|
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
OHS requirements : |
are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include:
|
Environmental requirements may include: |
|
Legislative requirements : |
are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include:
|
Organisational requirements may include: |
|
Match and join veneer |
matching may include:
joining veneer may include:
|
Work order is to include: |
and may include:
|
Appropriate personnel may include: |
|
Equipment may include: |
|
Communication may include: |
|
Pre start-up checks |
are conducted to ensure:
|
Feed rate is to include: |
|
Visually assessed is to include: |
|
Clipping is to include: |
|
Records and reports may include: |
and may be:
|
Regrading |
is the process of visually inspecting veneer to re-classify its quality and use after matching and joining has taken effect |
Movement of material may include: |
the use of:
lifting equipment such as:
assistance with lifting such as:
|
Storage may include: |
the use of:
and may be divided into:
|
Disposing of may include: |
|
Unit Sector(s)
Unit sector |
No sector assigned |
Co-requisite units
Co-requisite units |
||
Competency field
Competency field |
Wood Panel Products |