Modification History
Not Applicable
Unit Descriptor
Unit descriptor |
This unit describes the outcomes required to operate a specialised peeling lathe or rotary slicer to produce sheets of timber veneer from debarked logs. The unit includes operator maintenance General workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publication This unit replaces FPIWPP3201A Produce veneer from debarked logs |
Application of the Unit
Application of the unit |
The unit involves producing veneer from debarked logs in a forest products factory The skills and knowledge required for competent workplace performance are to be used within the scope of the person's job and authority |
Licensing/Regulatory Information
Refer to Unit Descriptor
Pre-Requisites
Prerequisite units |
||
Employability Skills Information
Employability skills |
This unit contains employability skills |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Prepare for peeling |
1.1. Applicable Occupational Health and Safety (OHS), environmental , legislative and organisational requirements relevant to producing veneer from debarked logs are identified and followed 1.2. Work order is reviewed and checked with appropriate personnel 1.3. Type and quantity of timber species to be peeled or sliced is acquired from the storage location 1.4. Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations 1.5. Veneer peeling or slicing process and thickness are planned in line with site procedures 1.6. Communication with others is established and maintained in line with OHS requirements |
2. Peel veneer |
2.1. Size and condition of logs is checked as acceptable and then loaded into the lathe 2.2. Drive logs are placed to maximise available veneer and waste product removed 2.3. Veneer peeling or slicing process is set and commenced to optimise veneer recovery and grading 2.4. Machine speed and control of veneer cut are constantly adjusted to suit the log characteristics in line with site procedures 2.5. Material with defects and log cores are disposed of in line with site procedures and environmental requirements 2.6. Processing and equipment faults are recorded and reported to the appropriate personnel |
3. Conduct operator maintenance |
3.1. Equipment lock-out procedures are followed in line with OHS legislation and site procedures 3.2. Cutting blades are checked for blunt or damaged condition in line with site procedures 3.3. Cutting blades are removed and replaced in line with manufacturer's recommendations 3.4. Machine area is kept clear of dust, off-cuts and debris in line with OHS requirements |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This describes the essential skills and knowledge and their level required for this unit |
Required skills |
|
Required knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently produce veneer from debarked logs within organisational requirements |
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements of this unit and include demonstration of:
|
Context of and specific resources for assessment |
|
Method of assessment |
|
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
OHS requirements : |
are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include:
|
Environmental requirements may include: |
|
Legislative requirements : |
are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include:
|
Organisational requirements may include: |
|
Logs may include: |
|
Work order is to include: |
and may include:
|
Appropriate personnel may include: |
|
Peeling or slicing |
is the process of removing timber in thin sheet form from a rotating lathe or rotary slicer |
Storage locations may include: |
the use of:
and may be divided into:
|
Equipment is to include: |
|
Veneer |
|
Communication may include: |
|
Drive logs |
is the log set-up and being utilised for veneer peeling to produce rotary (radial) sawn veneer |
Grading |
is the process of visually inspecting logs or timber to classify their quality and use |
Defects may include: |
|
Log cores |
are the remaining centre (pith) part of the log which is too small to remove further veneer from |
Disposing of may include: |
|
Records and reports may include: |
and may be:
|
Unit Sector(s)
Unit sector |
No sector assigned |
Co-requisite units
Co-requisite units |
||
Competency field
Competency field |
Wood Panel Products |