Unit of competency
Modification History
Release 3. Assessment Conditions clarified in relation to simulation being an assessment option. |
Release 2. Modifications made to Foundation Skills and Assessment Conditions. |
Release 1. This unit was released in DEF Defence Training Package release 1.0 and meets the Standards for Training Packages. This unit supersedes and is equivalent to DEFEO508D Conduct electrical/electronic circuitry tests.
|
Application
This unit describes the skills required to set up and conduct simple electrical/electronic circuitry tests on explosive ordnance or component parts. These tests are required to be conducted on a wide range of explosive ordnance during maintenance procedures. This unit applies to those required to set up and conduct simple electrical/electronic circuitry tests on explosive ordnance or component parts. The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to. Those undertaking this unit would work independently and as part of a team, under direct and/or indirect supervision, use discretion and judgement, and take responsibility for the quality of their output. They would perform specific tasks in a range of contexts. No licensing, legislative or certification requirements apply to unit at the time of publication. |
Pre-requisite Unit
Not applicable. |
Competency Field
Explosive Ordnance |
Unit Sector
Not applicable. |
Elements and Performance Criteria
ELEMENTS |
PERFORMANCE CRITERIA |
||
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. |
||
1 |
Prepare electrical/electronic circuitry for testing |
1.1 |
Identify testing requirements from work requests/instructions |
1.2 |
Identify, acquire and prepare technical references, tools and equipment required for the tests |
||
1.3 |
Identify, acquire, prepare, move and position explosive ordnance or component parts in preparation for the task |
||
1.4 |
Identify, calculate and assess net explosive quantities and compatibility and apply throughout the operation |
||
1.5 |
Monitor and maintain environmental conditions |
||
2 |
Conduct electrical/electronic circuitry tests |
2.1 |
Conduct required tests |
2.2 |
Record and maintain test results |
||
2.3 |
Interpret emergency procedures and apply contingency plans |
||
3 |
Finalise post test procedures |
3.1 |
Return explosive ordnance or component parts to storage |
3.2 |
Ensure serviceability of equipment/tools |
||
3.3 |
Maintain documentation and records |
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency. |
Range of Conditions
Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide. |
Unit Mapping Information
This unit supersedes and is equivalent to DEFEO508D Conduct electrical/electronic circuitry tests. |
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=6bdbab1e-11ed-4bc9-9cba-9e1a55d4e4a9