Qualification details

Release 

TP version 

Comments 

2

DEF12 V2

Layout adjusted. No changes to content.

1

DEF12 V1

First release.

Employability Skill 

Employability Skills Statement 

Defence qualifications have core units (which must be achieved) and elective units (where there is a choice of units which must be achieved) so different Employability Skills Summaries are possible within the one qualification, depending on the package of core units and chosen elective units.

Communication 

• access and clarify safety procedures and instructions
• access, read, interpret and apply information on safety
• follow instructions/directives and report information
• identify, analyse and confirm requirements to enter an explosive ordnance storage area/facility from work requests/instructions
• identify and act on or report, breaches in site safety
• identify and report incidents
• identify and note organisation incident and injury statistics
• identify documentation and licensing limitations
• identify hazardous materials labels and characteristics
• obtain relevant authorisation before specialised and hazardous work is carried out
• read to a level required to interpret job instructions, workplace forms and reports
• record and report details of first aid administered
• record and report incidents and injuries
• use a variety of verbal and non-verbal communication techniques
• write at the level required to complete workplace documentation and reports

Teamwork 

• apply principles of team work, and team aims and objectives
• encourage other team members
• liaise with relevant personnel
• recognise individual differences in the workplace, to value these differences and to adjust behaviour to account for these differences

Problem solving 

• apply emergency and contingency procedures
• assess and apply compatibility
• calculate and apply Net explosive quantity
• prepare procedures to rectify problems or non-adherence to policy identified during the inspection
• use knowledge of service environments to assist in work and to guide problem solving

Initiative and enterprise 

• maintain and/or refurbish site/equipment in accordance with organisation policy and procedures, and Range Standing Orders
• undertake liaison and notification of parties affected by the disposal in accordance with organisation policy and procedures and Range Standing Orders

Planning and organising 

• apply occupational health and safety requirements including those contained in organisation procedures, throughout the operation
• determine the task(s) to be performed, the resources to be allocated and the constraints that must be observed for their achievement
• develop and implement an explosive ordnance and/or weapons system policy
• prepare and plan inspection
• prepare for disposal
• prepare for entry
• research and identify environmental extremes related to the service environments

Self-management 

• apply personal safety measures
• ensure personal behaviour shows sensitivity to the differences between colleagues
• meet personal protection equipment requirements
• recognise and apply individual responsibilities regarding hazardous materials

Learning 

• learn about Explosive Transport Regulations
• learn about Australian Code for the Transport of Explosives by Road and Rail
• learn about legislation such as Racial Discrimination Act 1975; Sex Discrimination Act 1984; Human Rights and Equal Opportunity Commission Act 1986; Privacy Act 1988; Occupational Health and Safety (Commonwealth Employment) Act 1991; Disability Discrimination Act 1992

Technology 

• apply relevant characteristics and requirements of the explosive ordnance to be loaded/unloaded
• defuse and fuse explosive ordnance
• identify, prepare and position lifting/transfer equipment appropriate for the loading/unloading task
• understand characteristics and limitations of fuses
• understand explosive ordnance
• use appropriate information technology and software

Qualification Requirement : 17 units 

All 4 core units plus 7 Group A  (specialisation ) elective units from the list below plus 6 Group B  (general ) elective units 

Where a pre-requisite unit is attached to an elective unit it is identified by this symbol ∟.

The pre-requisite units attached to any of the elective units must be undertaken and are additional to the number of elective units required for the qualification.

The 6 Group B (general) elective units may be taken from the elective units listed below and may include 2 units taken from this Training Package, any other endorsed Training Package or any state/territory accredited qualification where the unit is in a qualification at the same level or a higher level.

Code 

Core Units 

DEFEO101D

Work safely with explosive ordnance

DEFEQ001C

Work with equity and diversity

BSBCMN311B

Maintain workplace safety

TLID107C

Shift materials safely using manual handling methods

Code 

Elective Units 

Group A  (specialisation )

DEFCA422B

Conduct range practices

DEFCM118B

Act as a range safety officer on a permanent range

DEFEO202D

Establish and maintain safety and security of explosive warehouses and workshops

DEFEO207C

Inspect explosive ordnance facilities

DEFEO208C

Supervise explosive ordnance engineering and logistics processes

DEFEO213A

Establish and operate an explosive ordnance field storage site

DEFEO217A

Operate a large quantity explosive ordnance facility

DEFEO401D

Load and unload platforms

DEFEO501D

Conduct explosive ordnance inspection

DEFEO505D

Breakdown explosive ordnance

DEFEO506D

Fuze and defuze explosive ordnance

DEFEO507D

Assemble and disassemble explosive components

DEFEO509D

Perform purging

DEFEO701C

Dispose of explosive ordnance

DEFEO702D

Destroy unexploded ordnance

DEFEO716C

Test for explosive substances

DEFRI001B

Treat risk within Defence at an operational level

DEFRI002B

Conduct risk assessment in a Defence environment

TLIB607C

Carry out inspection of vehicles designed to carry special loads

TLIC707C

Operate vehicle carrying special loads

TLID1507D

Identify and label explosives and dangerous goods

TLID1607D

Load and unload explosives and dangerous goods

TLID2707D

Prepare for transport of dangerous good

TLIF1207D

Apply safe procedures when handling/transporting dangerous goods or explosives

Group B  (general )

BSBSUS201A

Participate in environmentally sustainable work practices

HLTFA201A

Provide basic emergency life support

OR

HLTFA301B

Apply first aid

DEFEO201C

Respond to fire

DEFEO204C

Examine and certify free from explosive ordnance

DEFEO301D

Package ammunition

DEFEO302D

Unpackage ammunition

DEFEO303D

Monitor explosive ordnance environmental conditions

DEFEO502D

Conduct external explosive ordnance maintenance

DEFEO503C

Conduct explosive ordnance packaging inspection

DEFEO508D

Conduct electrical/electronic circuitry tests

DEFEO521A

Refurbish explosive ordnance packaging

DEFEO715C

Gauge explosive ordnance

PUAWER004B

Respond to workplace emergencies

TLIA1507C

Complete receival/despatch documentation

TLIA2207C

Participate in stocktakes

TLID1207C

Operate specialised load shifting equipment

TLIE207C

Estimate/calculate mass, area and quantify dimensions

TLIF207C

Conduct housekeeping activities

TLIO207D

Follow security procedures