Modification History
New to CPC08
Replaces unit CPCCBC4023A Plan and undertake site inspection and assessment of asbestos products and materials
Not equivalent
Unit Descriptor
This unit of competency specifies the outcomes required for assessors to visually inspect and use a range of measuring devices to undertake the monitoring of airborne asbestos fibres in the workplace as an integral part of identifying hazards, assessing risks, monitoring the effectiveness of controls, and ensuring that the workplace is free of asbestos fibres prior to reoccupation.
The unit includes the planning of the monitoring process, the selection and use of processes and air-monitoring equipment, the conduct of the assessment process, and the proper handling and interpretation of results.
Asbestos assessment and air monitoring are required during all friable (Class A) asbestos removal and for non-friable asbestos removal where a risk assessment indicates that airborne asbestos fibres may result from the removal activity.
Application of the Unit
Site location for work may be either domestic or commercial, and may be a demolition site, a new work site or an existing structure being renovated, extended, restored or maintained. Project sites may be construction sites and may also include ships, soils and fences.
Licensing/Regulatory Information
Occupational licenses are required nationally.
Work must be completed according to relevant legislative, code of practice, industry, customer and organisational requirements, including work health and safety (WHS) policies and procedures. Testing must conform to National Association of Testing Authorities (NATA) or other accredited laboratory requirements and standards.
Regulatory mechanisms apply to this unit. Candidates are advised to check for regulatory requirements.
Pre-Requisites
CPCCOHS1001A |
Work safely in the construction industry |
Employability Skills Information
This unit contains employability skills.
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
1 |
Plan for assessment process of asbestos removal. |
1.1 |
Scope, timelines and budget for the project are negotiated with the client and asbestos removalist or supervisor. |
1.2 |
Type of asbestos containing material (ACM), its location, friability and condition are identified by reference to the asbestos register and consultation with workplace personnel and client. |
||
1.3 |
Legislation, regulations, code of practice and standards are researched and confirmed to inform the planning process, identify risk and ensure a compliant and independent assessment process. |
||
1.4 |
Required reports are identified and undertaken in a timely manner and according to the requirements of the specific audience and the legislation, regulations, code of practice and standards. |
||
1.5 |
Characteristics of and health impacts from exposure to ACM and the rationale for air-monitoring processes are researched and confirmed. |
||
1.6 |
Accreditation framework and roles and responsibilities of personnel involved are identified and understood. |
||
1.7 |
Processes used in the compliant removal of friable and non-friable asbestos using enclosures and leak testing, decontamination units, airline respirators and negative pressure equipment are identified and understood. |
||
1.8 |
Work-site documentation is collected, reviewed and used to inform the planning process. |
||
1.9 |
Areas within the work site where measurements are to be taken are defined. |
||
1.10 |
Measuring equipment specific to the hazard and condition of the ACM, the environment, the activities being carried out and level of risk is selected. |
||
1.11 |
Limits of own expertise and available equipment are recognised and expert advice and equipment sought as appropriate. |
||
1.12 |
Equipment, including personal protective equipment (PPE), required to carry out the job is identified and sourced. |
||
1.13 |
Planning is documented and confirmed with the client, asbestos removalist and supervisor. |
2 |
Prepare to collect site measurements and other data. |
2.1 |
Arrangements are made with work site to collect information and data, including advising those involved of requirements to facilitate the measurement and monitoring process. |
2.2 |
Site visit is conducted and a visual inspection is completed according to legislation, regulations, code of practice and standards. |
||
2.3 |
Effective air monitor locations for each asbestos removal task are identified and recorded. |
||
2.4 |
Sampling process is defined according to the standards specified for membrane filter method for estimating airborne asbestos fibres and in consultation with relevant site personnel. |
||
2.5 |
Sampling schedule and strategy are defined after site inspection and in consultation with asbestos removalist and work site manager or supervisor. |
||
2.6 |
Air-monitoring program consisting of locations and schedule is developed and provided to asbestos removalist and supervisor. |
||
2.7 |
Operability of monitoring equipment is checked according to manufacturer specifications, organisational procedures and professional standards. |
3 |
Use measuring devices to collect site information and data. |
3.1 |
Air-monitoring equipment is selected, calibration records are checked , equipment is calibrated and appropriate flow rate is determined according to accredited laboratory requirements and professional standards. |
3.2 |
Equipment is used and maintained correctly to accurately collect data. |
||
3.3 |
Workplace safety procedures are followed during the collection process. |
||
3.4 |
Required volumes of samples are collected with minimum damage and disruption to the fabric, according to the membrane filter method, labelled and the filter holders replaced according to the sampling schedule and plan. |
||
3.5 |
Information and data are collected and results recorded noting where samples were taken and ensuring compliance with chain of custody protocols. |
||
3.6 |
Processes are put into place and checks made to ensure all data is collected under the control of a NATA or other accredited laboratory and according to industry standards and legislative requirements. |
||
3.7 |
Equipment is dismantled, decontaminated and parts or equipment disposed of according to regulations, code of practice and workplace procedures. |
||
3.8 |
Equipment is stored correctly or made ready for re-use. |
||
3.9 |
Sampling equipment is serviced and maintained according to professional standards and manufacturer specifications. |
4 |
Complete the monitoring process. |
4.1 |
Filter is labelled and prepared for despatch to the laboratory, ensuring correct handling procedures for filters and chain of custody requirements. |
4.2 |
Confirmation of the exact nature of fibres is sought where necessary. |
||
4.3 |
Samples are retained and stored in labelled containers. |
||
4.4 |
Site set-up, removal, breakdown and decontamination procedures are overseen according to legislative and code of practice requirements. |
||
4.5 |
Documentation and processes to ensure the compliant transportation of samples are implemented. |
5 |
Evaluate and document results of monitoring process according to accredited laboratory requirements. |
5.1 |
Results received from the NATA or other accredited laboratory are interpreted and evaluated against the recognised standard. |
5.2 |
Further calculations are performed as required on the technical data received from the NATA or other accredited laboratory. |
||
5.3 |
Outcomes from the technical analysis are documented. |
||
5.4 |
Concise, logical and accurate report is prepared that addresses regulatory requirements and is in the form required by audience . |
||
5.5 |
Work site is visually inspected to ensure compliance with procedures prior to issuing a clearance certificate. |
||
5.6 |
Clearance certificate is completed according to legislative, regulatory and code of practice requirements. |
||
5.7 |
Recommendations are made regarding exposure and control monitoring processes. |
||
5.8 |
Results and records are retained and stored in a readily retrievable format according to regulatory requirements and standards. |
Required Skills and Knowledge
This section describes the skills and knowledge required for this unit. |
Required skills |
|
Required knowledge |
|
Evidence Guide
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, providing that simulated or project-based assessment techniques fully replicate workplace conditions, materials, activities, responsibilities and procedures. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
A person should demonstrate the ability to:
|
Context of and specific resources for assessment |
This unit is to be assessed using standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian standards’ requirements. Resource implications for assessment include:
Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. |
Method of assessment |
Assessment methods must:
Validity and sufficiency of evidence requires that:
Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed. Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Type of asbestos containing materials (both friable and non-friable) may include: Note:
|
|
Legislation, regulations, code of practice and standards may include: |
|
Independent assessment is a: |
|
Characteristic and health impacts of exposure to ACM include: |
|
Accreditation framework must include: |
|
Compliant removal of asbestos by specialist removalists requires application of methodologies and processes, including: |
|
Work-site documentation may include: |
|
Areas within the work site where measurements are to be collected are determined by factors, including: |
|
Personal protective equipment used in the monitoring process may include: |
|
Air monitor locations may include: |
|
Membrane filter method must conform to the: |
|
Strategy for sampling may include consideration of: |
|
Operability of equipment checks may include: |
|
Equipment may include: |
|
Calibration records are checked for equipment, including: |
|
Equipment : |
|
Information and data are collected and may include: |
|
Report containing required information and data may be required for or contain: |
|
Audience for the report may include: |
|
Unit Sector(s)
Construction
Custom Content Section
Not applicable.