Qualification details

CPC32713 - Certificate III in Gas Fitting (Release 1)


ReleaseStatusRelease date
1 1 (this release)Current 17/Jan/2014

Usage recommendation:
Supersedes CPC32712 - Certificate III in Gas FittingReplaces superseded non-equivalent CPC32712. 16/Jan/2014

Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssential
CPCCCM2008B - Erect and dismantle restricted height scaffoldingErect and dismantle restricted height scaffolding Elective
CPCCCM2010B - Work safely at heightsWork safely at heights Elective
CPCCCM3001C - Operate elevated work platformsOperate elevated work platforms Elective
CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industryApply OHS requirements, policies and procedures in the construction industry Elective
CPCCRI3001A - Operate personnel and materials hoistsOperate personnel and materials hoists Elective
CPCCST2005A - Carry out load slinging of off-site materialsCarry out load slinging of off-site materials Elective
CPCPCM2039A - Carry out interactive workplace communicationCarry out interactive workplace communication Core
CPCPCM2040A - Read plans and calculate plumbing quantitiesRead plans and calculate plumbing quantities Core
CPCPCM2041A - Work effectively in the plumbing and services sectorWork effectively in the plumbing and services sector Core
CPCPCM2043A - Carry out WHS requirementsCarry out WHS requirements Core
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 46


SchemeCodeClassification value
ANZSCO Identifier 334114 Gasfitter 
ASCO (occupation type) Identifier 4431-13 Gasfitter 
ASCED Qualification/Course Field of Education Identifier 0403 Building 
Qualification/Course Level of Education Identifier 514 Certificate III 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 334114 Gasfitter 02/May/2014 
ASCO (occupation type) Identifier 4431-13 Gasfitter 02/May/2014 
ASCED Qualification/Course Field of Education Identifier 0403 Building 02/May/2014 
Qualification/Course Level of Education Identifier 514 Certificate III 17/Jan/2014 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Revised qualification deemed not equivalent to CPC32712

  • core unit CPCPGS3061A Install and commission Type A gas appliances revised, replacing non-equivalent CPCPGS3058A
  • prerequisite unit to CPCCCM2008B (CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry) added to elective list
  • pathways information added


This qualification provides a trade outcome in gas fitting.

Occupational titles may include:

  • Gas fitter.

The qualification has core and elective unit of competency requirements that cover some common skills for the plumbing industry, as well as gas fitting specialist units of competency.

The plumbing industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context.

Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement.

Pathways Information

This qualification is suitable for an Australian Apprenticeship pathway.

Licensing/Regulatory Information

This is a licensed occupation. Check with relevant state and territory licensing and regulatory authorities. State and territory jurisdictions may have different regulatory requirements.

Entry Requirements

Not applicable.

Employability Skills Summary

Employability skill 

Industry/enterprise requirements for this qualification 


  • Communicates with clients, colleagues and others using effective and appropriate communication techniques, including:
  • Clear and direct communication
  • Active listening
  • Verbal and non-verbal language
  • Questioning to identify and confirm requirements
  • Language and concepts appropriate to cultural differences
  • Follows instructions from supervisor and other relevant persons
  • Understands, interprets and applies information as required from:
  • Regulatory, legislative, licensing and organisational requirements
  • Environmental and WHS requirements, including safety data sheets (SDS)
  • Codes and standards
  • Plans, drawings and specifications
  • Schedules
  • Load tables
  • Designs
  • Safety signs and symbols
  • Organisational policies and procedures
  • Understands relevant definitions, terminology, symbols, abbreviations and language
  • Uses industry-accepted visual communications, including hand signals
  • Reports and records routine workplace and regulatory information including test data
  • Applies measurements and calculations using appropriate equipment, formulas and records as required
  • Reports and records hazards and risks
  • Produces drawings and sketches


  • Works as part of a team
  • Provides assistance and encouragement to other team members
  • Initiates and encourages improvements in team performance
  • Works with others to plan and sequence tasks
  • Identifies and uses the strengths of other team members
  • Relates to people from diverse social, cultural and ethnic backgrounds and with varying physical and mental abilities
  • Participates in workplace meetings

Problem solving 

  • Responds effectively to hazards, risks, emergencies and first aid situations
  • Examines tools and equipment prior to use for damage, missing components or other defects
  • Identifies typical faults and problems and takes remedial actions and/or reports to supervisor
  • Rectifies simple faults with tools and equipment
  • Tests systems and components
  • Calculates ventilation requirements and gas storage capacity
  • Locates and repairs gas leaks
  • Assesses roof work site safety

Initiative and enterprise 

  • Maximises use of resources by recycling, re-using or using appropriate disposal methods
  • Responds to change and workplace challenges
  • Determines requirements for heating system installations, appliance installations, flue installations and gas piping system purging

Planning and organising 

  • Prepares work area
  • Identifies and obtains necessary documentation
  • Collects, analyses and organises workplace information
  • Selects and uses appropriate materials, tools and equipment
  • Carries out site inspections
  • Determines material quantity requirements and conformity to requirements
  • Coordinates delivery of materials
  • Determines installation requirements
  • Fabricates, sets out, installs and commissions components, equipment and systems
  • Prioritises and sequences tasks
  • Applies time management skills to ensure work is completed to time requirements

Self management 

  • Recognises obligations and accepts responsibility for own work and safety
  • Recognises quality requirements and completes work to expected standard
  • Identifies personal career development needs and sets own and team work goals
  • Participates in workplace induction
  • Cleans up work area, including tools and equipment
  • Seeks support to improve work performance


  • Identifies own learning needs and seeks skill development as required
  • Is open to learning new ideas and techniques
  • Participates in workplace induction


  • Uses electricity and electrical equipment safely
  • Uses and operates a range of tools and equipment correctly and safely
  • Properly starts up, operates and shuts down equipment
  • Identifies technological trends that may affect the plumbing and services sector
  • Carries out pre- and post-operational checks on tools and equipment
  • Performs tool and equipment maintenance as required

Packaging Rules

To achieve this qualification, the candidate must demonstrate competency in:

  • 32 units of competency:
  • 26 core units
  • 6 elective units.

Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.

Core units  


Carry out interactive workplace communication


Read plans and calculate plumbing quantities


Work effectively in the plumbing and services sector


Carry out WHS requirements


Handle and store plumbing materials


Use plumbing hand and power tools


Carry out levelling


Cut and join sheet metal


Mark out materials


Weld using oxy-acetylene equipment


Weld using manual metal arc welding equipment


Work safely on roofs


Flash penetrations through roofs and walls


Install LPG systems in caravans, mobile homes and mobile workplaces


Install LPG systems in marine craft


Install gas pressure control equipment


Install Type A gas appliance flues


Purge consumer piping


Maintain Type A gas appliances


Disconnect and reconnect Type A gas appliances


Calculate and install natural ventilation for Type A gas appliances


Install gas piping systems


Size consumer gas piping systems


Install LPG storage of aggregate storage capacity up to 500 litres


Install and commission Type A gas appliances


Provide basic emergency life support

Elective units  


Erect and dismantle restricted height scaffolding


Work safely at heights


Operate elevated work platforms


Apply OHS requirements, policies and procedures in the construction industry


Operate personnel and materials hoists


Carry out load slinging of off-site materials


Cut using oxy-LPG-acetylene equipment


Carry out simple concreting and rendering


Weld polyethylene and polypropylene pipes using fusion method


Fabricate and install non-ferrous pressure piping


Install Type B gas appliance flues


Install gas sub-meters


Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8KL


Assemble mechanical services components


Fabricate and install steel pressure piping


Install small bore heating systems


Install and test ducting systems


Perform routine gas tungsten arc welding


Perform routine gas metal arc welding


Install trench support

Custom Content Section

Not applicable.

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components


- Qualification details
- Qualification components

Accredited courses

- Accredited course details


- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.