^
 
 

Unit of competency details

AURVTT005 - Select trim and fabric materials (Release 1)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to AURVTT2005 - Select and apply trim and fabric materials 13/Apr/2016

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 14/Apr/2016

Companion volumes:
Unit of competency Assessment requirements

Delivery:
Find RTOs approved to deliver this unit of competency.

Training packages that include this unit

Qualifications that include this unit

CodeSort Table listing Qualifications that include this unit by the Code columnTitleSort Table listing Qualifications that include this unit by the Title columnUsage RecommendationRelease
MEA41118 - Certificate IV in Aeronautical Life Support EquipmentCertificate IV in Aeronautical Life Support EquipmentSuperseded1 
MEA41119 - Certificate IV in Aeronautical Life Support EquipmentCertificate IV in Aeronautical Life Support EquipmentSuperseded1 
MEA30322 - Certificate III in Aircraft Life Support and FurnishingCertificate III in Aircraft Life Support and FurnishingCurrent1 
AUR20420 - Certificate II in Automotive Electrical TechnologyCertificate II in Automotive Electrical TechnologyCurrent1-2 
AUR32316 - Certificate III in Automotive and Marine Trimming TechnologyCertificate III in Automotive and Marine Trimming TechnologySuperseded1-2 
AUR32320 - Certificate III in Automotive and Marine Trimming TechnologyCertificate III in Automotive and Marine Trimming TechnologyCurrent1-2 
AUR20416 - Certificate II in Automotive Electrical TechnologyCertificate II in Automotive Electrical TechnologySuperseded1-2 
AUR20916 - Certificate II in Automotive Body Repair TechnologyCertificate II in Automotive Body Repair TechnologySuperseded1-2 
AUR20920 - Certificate II in Automotive Body Repair TechnologyCertificate II in Automotive Body Repair TechnologyCurrent1-2 
MEA41122 - Certificate IV in Aeronautical Life Support EquipmentCertificate IV in Aeronautical Life Support EquipmentCurrent1 
Refresh information in 'Table listing Qualifications that include this unit'
Navigate to first page in table listing Qualifications that include this unit.Navigate to previous page in table listing Qualifications that include this unit.
Navigate to page 1 in table listing Qualifications that include this unitNavigate to page 2 in table listing Qualifications that include this unit
Navigate to the next page in table listing Qualifications that include this unit.Navigate to the last page in table listing Qualifications that include this unit.
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 11

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 030513 Upholstery And Vehicle Trimming  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 030513 Upholstery And Vehicle Trimming  09/Aug/2016 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Content

Compare:
Compare content of this unit of competency with other releases or training components
Download:

Unit of competency

Modification History

Release 

Comment 

Release 1 

New unit of competency.

Application

This unit describes the performance outcomes required to select trim and fabric materials and determine attaching methods. It involves preparing for the task, selecting materials for specific applications, checking material quality, and completing workplace processes and documentation.

It applies to those working in the automotive and marine trimming industry.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Competency Field

Vehicle body

Unit Sector

Technical - Trimming and Upholstery

Elements and Performance Criteria

Elements 

Elements describe the essential outcomes.

Performance Criteria 

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for work

1.1 Job requirements are determined from workplace instructions

1.2 Hazards associated with the work are identified and risks are managed

1.3 Work area is prepared and a range of trim materials is gathered for inspection according to workplace instructions

2. Select and inspect materials

2.1 Trim materials are selected against job and customer requirements

2.2 Trim materials are checked for quality and reported if faulty

3. Determine attachment methods

3.1 Attachment material information is sourced and interpreted

3.2 Attachment options are analysed and those most appropriate to the circumstances are selected

3.3 Selected option is reported according to workplace procedures

4. Complete work processes

4.1 Final material selection is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

4.3 Workplace documentation is processed according to workplace procedures

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.

Skills 

Description 

Learning skills to:
  • locate appropriate sources of information efficiently.

Writing skills to:
  • legibly and accurately fill out workplace documentation.

Oral communication skills to:
  • clarify instructions and procedures

Numeracy skills to:
  • use basic mathematical operations, including addition, subtraction, multiplication and division, to calculate:
  • quantities of trim and materials
  • fitting measurements in metric and imperial systems
  • measure accurately using metric and imperial measuring equipment.

Planning and organising skills to:
  • plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed within workplace timeframes.

Range of Conditions

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

There is no Range of Conditions for this unit.

Unit Mapping Information

Equivalent to AURVTT2005 Select and apply trim and fabric materials

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

 

Assessment requirements

Modification History

Release 

Comment 

Release 1 

New unit of competency.

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria and foundation skills:

  • select trim and fabric materials for three different vehicle or marine components.

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

  • environmental requirements, including procedures for storing and disposing of waste materials
  • procedures for selecting trim and fabric materials for automotive and marine applications
  • types and application of trims, including:
  • polyvinyl chloride (PVC)
  • leather
  • fabric
  • procedures for identifying trim material faults and defects
  • procedures for selecting attachment options, including types and application of attachments, including sewing, rivets, adhesives and stapling
  • techniques and procedures to apply trim materials, including:
  • measuring, marking and cutting
  • fabrication and sewing techniques
  • trim attachment
  • trim cleaning.

Assessment Conditions

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the trim and fabric materials that they have selected, e.g. work orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

  • automotive or marine trimming workplace or simulated workplace
  • PPE requirements to apply trim materials
  • workplace instructions
  • trim and fabric materials
  • trim attachment consumables
  • three different vehicle or vessel components requiring trim material matching
  • tools, equipment and materials appropriate for selecting trim materials.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

Back to top