Modification History
Not Applicable
Unit Descriptor
|
Unit descriptor |
This unit covers the competence to carry out vehicle alignment pre-checks and to reset steering system alignment adjustments according to customer specifications. |
Application of the Unit
|
Application of the unit |
The unit applies to alignment procedures relative to a range of light vehicles which may include 4WD vehicles, light commercial vehicles and various types of motorsport vehicles. Work involves resetting wheel alignment adjustments to achieve non-standard specifications according to a customer's specifications. Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment. Work is carried out in accordance with award provisions. |
Licensing/Regulatory Information
Not Applicable
Pre-Requisites
|
Prerequisite units |
||
Employability Skills Information
|
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
|
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
|
ELEMENT |
PERFORMANCE CRITERIA |
|
1. Prepare to reset steering system alignment |
1.1. Work instructions are used to determine job requirements, including quality, material, equipment and quantities 1.2. Job specifications are read and interpreted 1.3. OH&S requirements, including breathing protection, personal protection needs, are observed throughout the work 1.4. Material for application is selected and inspected for quality 1.5. Correct hand and power tooling are identified and checked for safe use 1.6. Products are determined to minimise waste material 1.7. Reasons for resetting alignment specifications to no--standard settings are discussed and clarified with customer |
|
2. Carry out alignment pre-checks |
2.1. Non-standard adjustment settings are confirmed as technically appropriate and are safe to carry out 2.2. Modifications made to steering and suspension system are inspected to confirm they do not make the vehicle unroadworthy if it is designed for road use 2.3. Serviceability status of components involved in alignment adjustments is confirmed 2.4. Vehicle is tested to confirm the serviceability of steering and suspension system |
|
3. Make alignment adjustments to achieve specifications |
3.1. Alignment equipment is safely connected to the vehicle according to enterprise work practices 3.2. Wheel alignment measuring equipment is used in a safe manner in accordance with manufacturer/component/ supplier/enterprise instructions and work practices 3.3. Alignment adjustments are completed without causing damage to system components and/or alignment equipment 3.4. Any alignment problems are notified and discussed with the customer prior to rework being carried out 3.5. Vehicle is tested to confirm customer requirements have been achieved |
|
4. Complete documentation and vehicle history records |
4.1. Alignment adjustment data is entered in customer's vehicle history file(s) 4.2. Customer documentation is completed and confirmed |
|
5. Clean up work area and maintain equipment |
5.1. Material that can be reused is collected and stored 5.2. Waste and scrap is removed following workplace procedures 5.3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures 5.4. Unserviceable equipment is tagged and faults identified in accordance with workplace 5.5. Operator maintenance is completed in accordance with manufacturer/component supplier specifications and site procedures 5.6. Tooling is maintained in accordance with workplace procedures |
Required Skills and Knowledge
|
REQUIRED SKILLS AND KNOWLEDGE |
|
This section describes the skills and knowledge required for this unit. |
|
Required skills |
|
Required knowledge |
|
A working knowledge of:
|
Evidence Guide
|
EVIDENCE GUIDE |
|
|
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
|
Overview of assessment |
|
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of:
|
|
Context of , and specific resources for assessment |
Application of competence is to be assessed in the workplace or simulated worksite Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints Assessment is to comply with regulatory requirements, including Australian Standards The following resources should be made available:
|
|
Method of assessment |
Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies Assessment may be applied under project related conditions and require evidence of process Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role |
|
Guidance information for assessment |
|
Range Statement
|
RANGE STATEMENT |
|
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
|
Resetting alignment specifications |
Reasons for resetting alignment specifications to non-standard settings may include:
|
|
Steering and suspension modifications |
Types of steering and suspension modifications may include:
|
|
Alignment equipment |
Alignment equipment may include:
|
|
Vehicle history data |
Types of vehicle history data may include:
|
|
OH &S |
OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances |
|
Personal protective equipment |
Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices |
|
Safe operating procedures |
Safe operating procedures are to include, but are not limited to operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors |
|
Emergency procedures |
Emergency procedures related to this unit are to include but may not be limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation |
|
Environmental requirements |
Environmental requirements are to include but are not limited to waste management, machine hygiene, dust and clean-up management |
|
Quality requirements |
Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures |
|
Statutory /regulatory authorities |
Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice |
|
Tooling and equipment |
Tooling and equipment may include hand tooling, diagnostic and monitoring systems, meters, gauges, load testing devices, and pulling and pushing devices |
|
Materials |
Materials may include spare parts, lubricants, fluids and cleaning materials |
|
Communications |
Communications are to include, but are not limited to verbal and visual instructions and fault documenting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers |
|
Information /documents |
Sources of information/documents may include:
|
Unit Sector(s)
|
Unit sector |
Technical |
Co-requisite units
|
Co-requisite units |
||
Competency field
|
Competency field |
